Question

我正在为IRQ编号8开发一个驱动程序，它对应于RTC时钟。我有以下问题。当我通过request_irq请求IRQ时，我收到EBUSY错误。我认为首先使用free_irq（8，NULL）可以解决问题（至少它适用于内核版本2.6.24-23-generic）。但是，当我使用它时，我收到错误“试图释放已经免费的IRQ 8”。检查/处理/中断我看到以下内容：

8: 1 0 IO-APIC-edge rtc0

这是我在dmesg中遇到的错误：

[14876.256173] ------------[ cut here ]------------
[14876.256182] WARNING: at kernel/irq/manage.c:1195 __free_irq+0x91/0x190()
[14876.256185] Hardware name: Aspire 7720     
[14876.256187] Trying to free already-free IRQ 8
[14876.256189] Modules linked in: cmos_driver_alarm(O+) cmos_driver_ioctl(O) nls_cp437 vfat fat usb_storage uas listapci_driver(O) cmos_driver_read(O) aes_i586 cryptd aes_generic fuse mxl5005s zl10353 dvb_usb_ce6230 dvb_usb dvb_core arc4 joydev nouveau iwl3945 iwlegacy mac80211 ir_lirc_codec lirc_dev drm_kms_helper snd_hda_codec_realtek ir_mce_kbd_decoder ttm ir_sanyo_decoder firewire_ohci sdhci_pci sdhci cfg80211 drm ir_sony_decoder ir_jvc_decoder snd_hda_intel snd_hda_codec snd_pcm mmc_core tg3 intel_agp intel_gtt agpgart r852 sm_common nand nand_ecc ir_rc6_decoder iTCO_wdt firewire_core snd_page_alloc i2c_i801 r592 snd_hwdep serio_raw nand_ids ir_rc5_decoder libphy iTCO_vendor_support crc_itu_t i2c_core mtd memstick psmouse rc_rc6_mce ir_nec_decoder thermal battery pcspkr processor video button ac acer_wmi mxm_wmi evdev sparse_keymap rfkill ene_ir wmi rc_core vboxnetflt(O) vboxdrv(O) vhba(O) snd_seq snd_timer snd_seq_device snd soundcore ext4 crc16 jbd2 mbcache sr_mod cdrom sd_mod pata_acpi hid_logitech_dj usbhid hid ata_generic ata_piix libata scsi_mod uhci_hcd ehci_hcd usbcore usb_common [last unloaded: cmos_driver_alarm]
[14876.256283] Pid: 10363, comm: insmod Tainted: G        W  O 3.3.1-1-ARCH #1
[14876.256286] Call Trace:
[14876.256292]  [<c01351f2>] warn_slowpath_common+0x72/0xa0
[14876.256296]  [<c01a89e1>] ? __free_irq+0x91/0x190
[14876.256299]  [<c01a89e1>] ? __free_irq+0x91/0x190
[14876.256303]  [<c01352c3>] warn_slowpath_fmt+0x33/0x40
[14876.256306]  [<c01a89e1>] __free_irq+0x91/0x190
[14876.256310]  [<c01a8b23>] free_irq+0x43/0xa0
[14876.256314]  [<f803501e>] init_driver+0x1e/0xc8 [cmos_driver_alarm]
[14876.256318]  [<c0101124>] do_one_initcall+0x34/0x170
[14876.256325]  [<f8035000>] ? 0xf8034fff
[14876.256330]  [<c018f295>] sys_init_module+0x8c5/0x1a70
[14876.256342]  [<c04ae85f>] sysenter_do_call+0x12/0x28
[14876.256345] ---[ end trace 81112f980bdc845e ]---

知道我做错了什么？提前谢谢

Answer 1

你正在将NULL作为free_irq的参数传递给你。该功能在允许您释放它之前检查它是否与request_irq匹配。

只需查看函数_free_irq：

/* desc is obtained via irq_to_desc */
action_ptr = &desc->action;
for (;;) {
        action = *action_ptr;

        if (!action) {
                WARN(1, "Trying to free already-free IRQ %d\n", irq);
                raw_spin_unlock_irqrestore(&desc->lock, flags);

                return NULL;
        }

        /* If dev_id doesn't match it just goes on. */
        if (action->dev_id == dev_id)
                break;

        action_ptr = &action->next;
}

Answer 2

有可能作者已经足够好，可以请求设置了IRQF_SHARED标志的IRQ行。使用request_irq调用IRQF_SHARED应该允许您的模块在这种情况下与RTC模块共享IRQ行。

request_irq返回EBUSY，free_irq表示IRQ是免费的

2 个答案: